The electrolux dishwasher i10 error means the dishwasher has detected a water-inlet problem: it is not filling, or not filling fast enough, to start the wash. Because the problem is about water getting in rather than anything failing inside the tub, the cause is very often on the supply side, which makes this one of the friendlier codes to resolve yourself.
Before assuming the dishwasher itself is broken, trace the water path from the shutoff valve under the sink to the inlet valve on the machine.
What the electrolux dishwasher i10 error means
A dishwasher fills through a supply line connected to the hot water valve under the sink, then through an inlet hose to a solenoid-operated inlet valve on the machine itself. If the supply valve is closed, the hose is kinked, or the valve or its inlet screen is clogged with sediment, the tub does not fill within the expected time and the control posts i10.
First checks you can do
- Confirm the water shutoff valve under the sink feeding the dishwasher is fully open.
- Check the flexible supply line for a kink, especially if the dishwasher was recently moved during installation or a countertop project.
- Run the kitchen hot tap and confirm normal pressure and temperature reach the sink.
- Power the dishwasher off at the breaker for a few minutes, then restore power and run a short cycle to clear a stored problem.
If the supply checks out and i10 persists, the water inlet valve on the dishwasher itself is the next suspect. Our Electrolux dishwasher error-code guides cover i10 alongside the related i20 drain and i30 leak alerts.
When it is the inlet valve
A failed or partially clogged inlet valve will not open fully even with good supply pressure behind it, and mineral buildup inside the valve body is a common cause on hard-water supplies. Testing the valve’s solenoid coil and confirming water flow through it needs a meter and a hands-on approach — a straightforward, genuine OEM part replacement once confirmed, but not a guess-and-swap job.
Do not overlook simple installation issues
If the dishwasher was recently installed or the kitchen had plumbing work done, double-check that the supply line was actually reconnected and the valve reopened — an easy step to miss and a very common real cause of i10 right after a countertop or sink project. Our Electrolux dishwasher installation guide covers the full connection checklist.
A note on hard-water areas
Households on hard water see the inlet valve and its screen clog with mineral scale faster than average, which can turn an occasional electrolux dishwasher i10 error into a recurring one even when the supply valve itself is working fine. Running a dishwasher-safe descaling product through an empty cycle every few months helps keep mineral buildup from reaching the inlet valve in the first place, alongside the filter and rinse-aid care covered in our maintenance guide.
Book Electrolux dishwasher service
If the supply is confirmed good and the electrolux dishwasher i10 error keeps returning, our experienced, independent technicians repair Electrolux dishwashers with genuine OEM parts and a 30-day labor warranty. Schedule a visit, see what our dishwasher repair service covers, or confirm your model details at electrolux.com.
