What PF means on your Electrolux dishwasher (electrolux pf error)
An electrolux pf error is a status indicator, not a problem, on your Electrolux dishwasher — it means a power interruption occurred mid-cycle. The control simply needs to be restarted once power is stable again. Frequent PF without any real outage points toward the household wiring or circuit.
Symptoms
The signs below help confirm you are dealing with this condition rather than a different problem on your Electrolux dishwasher. You may notice one of them or several together, and they can appear gradually or suddenly after a power event, a wash or cook cycle, a spill, or recent installation or service.
- The display shows PF after an outage or breaker trip
- The cycle stopped partway through
- PF appears with no obvious cause
- Pressing Start/Cancel clears the indicator
Common causes
Several different problems can produce these symptoms. Working through the most likely causes in order separates a quick owner-level check from a problem that needs trained service and the correct Electrolux parts.
- Power interruption mid-cycle — a brief outage, surge, or breaker trip cut power to the unit
Troubleshooting steps you can try
Work through these checks in order before calling for service. Stop wherever you are unsure, or where mains voltage, gas, a hot oven cavity, water, or a sealed component is involved, and hand the rest to a qualified technician.
- Press Start/Cancel to clear PF.
- Restart the cycle from the beginning.
- Confirm the breaker feeding the dishwasher is on and the plug connection is firm.
- If PF keeps recurring with no actual power outage, have the household wiring and circuit checked.
Parts a technician may replace
Depending on what the diagnosis shows, a technician may inspect, test, or replace the house wiring, outlet, breaker, and control board. The correct part for your Electrolux dishwasher is matched from the model and serial number, and genuine OEM components are fitted through trusted parts suppliers rather than generic substitutes so performance, safety, and the appliance long working life are all protected. Confirming the failed part before ordering avoids replacing more than the problem actually requires.
When to call a technician
PF that recurs with no real power loss needs an electrician or experienced technician to check the household wiring or circuit feeding the dishwasher. This condition is rated Low severity, so there is no emergency — but if the same PF keeps returning after the checks above, a technician should confirm the cause before any part is replaced. As an independent repair service we are not affiliated with the manufacturer, and we work only with experienced, skilled technicians and genuine OEM parts from trusted parts suppliers, with our workmanship backed by a 30-day labor warranty. When you book, have your Electrolux dishwasher model and serial number ready so the right part for your exact build can be matched before the visit and the PF condition resolved in as few trips as possible.
Related help and Electrolux resources
If the PF condition keeps returning after these checks, book Electrolux dishwasher repair, browse our dishwasher error-code guides and step-by-step repair guides, or schedule service in your area on our locations page. See also the related i80 memory error. For full manufacturer specifications and model lookup, visit electrolux.com.
